<-- nev left start -->

Diesel Engine Controller

Diesel Engine Controller
Diesel Engine Controller
Price And Quantity
  • 1
  • Piece/Pieces
  • 8500 INR
Product Specifications
  • 50 Hertz (HZ)
  • LED
  • 230VAC Volt (v)
  • 151 X 151 Millimeter (mm)
  • 500 Milligram (mg)
  • 1 YEAR
    Product Description

    Our company has sculpted a remarkable place in the market as a reputed manufacturer and supplier of Automative Diesel Engine Controller. It is highly reliable & compact microcontroller based engine crank relay system. This system offers annunciation and controlling with audio / visual signal & potential free o/p contact. We manufacture this controller at our sound production unit using high quality materials and components. Automative Diesel Engine Controller is available in different specifications as per their requirements.


    • Compact design
    • Easy to install
    • Maintenance free

    Diesel Engine Controller

    Introduction -

    Dynatek make ECR 16 is one of the most user friendly, Highly reliable & compact microcontroller based Engine Crank Relay system. This system offers annunciation and controlling with Audio / Visual signal & potential free o/p contact. It has Auto / Manual mode.

    Principle of Operation -

    ECR 16" Controller is developed to start engine in Auto / Manual mode. In auto mode Controller continuously scan "HYDRANT PRESSURE", if it drops Controller cranks engine automatically through start relay .When engine reaches to set running condition it is automatically switched over to manual mode to stop the engine manually as per the "FIRE FIGHTING NORMS". It accepts input faults (Potential free Contact) like LLOP, Over speed, Over heat, etc. Any one of the input fault occurs, the corresponding LED window starts flashing & gives signal to hooter relay for audio alarm. Hooter relay is provided to connect hooter for audio alarm. Input faults are site selectable ( NO & NC). Dual rate flashing is provided for differentiating the first & subsequent fault. Setting for ON TIME, OFF TIME & Attempt for CRANK can be done by DIP SWITCH

    The Alarm Faults indication.
    • Low Lub Oil Pressure 2) High Water Temperature 3) Over Speed
    • Low Diesel level 5) Engine fail to start
    Fault Input Points - 12 Nos. ( All the inputs are opto - isolated)
    Power Consumption - 4 Watt
    Weight - - 300 gm.
    Window indication - Bright Red LED Display
    Fault Inputs - Potential free contact : NO or NC
    Flashing rate - For first fault 300 flashes / Min. & Subsequent fault 60 flashes / Min.
    Hooter Relay contact Rating - 1 Amp. / 230 VAC It is advisable to connect additional relay for heavy load
    START, STOP Relay contact Rating - 10 Amp. / 230 VAC It is advisable to connect additional relay for heavy load.
    Additional open collector o/p for Remote Indication - 100 mA Sinking mode
    Supply - 24 / 12 VDC.
    Mechanical Details
    Bezel Size
    Cut out Size
    - 155 X 155 mm
    138 X 138 mm
    Trade Information
    • 2-3 Days
    • If order is confirmed we will reimburse the sample cost
    • All India
    Contact Us

    327, Diamond Ind.Estate, Near Check Naka,Ketkipada Rd., Dahisar (East), Mumbai, Maharashtra, 400068, India
    Phone :+918045802639